TMS 2017 146th Annual Meeting & Exhibition Supplemental Proceedings

Quantifying and Modeling Deformation Mechanisms.- Strain Localization Structures in Textured Magnesium AZ31 under Reversed Loading via Multi-scale Digital Image Correlation.- Deformation and Strengthening Mechanisms in AISI 321 Austenitic Stainless Steel under both Dynamic and Quasi-static Loading Conditions.- Analysis of Dislocation Structures in Ferritic and Dual Phase Steels Regarding Continuous and Discontinuous Loading Paths.- Microstructural Characterization of Inconel 600 Tubes after Tensile Tests at Various Temperatures and Strain Rates.- Part 5: Advanced High-Strength Steels.- Influences of Thermomechanical Treatments on the Microstructure Evolution and Mechanical Properties of Nano-precipitates Strengthened Steels.- Effects of Solid Solution Treatment on the Microstructure and Mechanical Properties in the Ultra-high Strength Steel Strengthened by Nanoscale Particles.- Effects of Microstructure on the Strain Rate Sensitivity of Advanced Steels.- Part 6: Advanced Materials in Dental and Orthopedic Applications.- Characterization of Chitin Synthesized from Snail Shell.- Titanium-magnesium Composite for Dental Implants (BIACOM).- Part 7: Alloys and Compounds for Thermoelectric and Solar Cell Applications V.- Thermoelectric Behaviour of Polyvinyl Acetate /CNT Composites.- Part 8: Applications of Solidification Fundamentals.- Microstructure Characteristics of A356 Nanocomposites Manufactured Via Ultrasonic Cavitation Processing under Controlled Solidification Conditions.- Part 9: Biological Materials Science.- Development of Sponge Structure and Casting Conditions for Absorbable Magnesium Bone Implants.- Osteoporosis and fatigue fracture prevention by analysis of bone microdamage.- Bone Remodeling under Tooth Loading.- Investigating Biochemical Constituents of Cymbopogon citratus Leaf: Prospects on Total Corrosion of Concrete Steel-rebar in Acidic-Sulphate Medium.- Two-step sintering effects on the microstructure and mechanical properties of forsterite scaffolds.- Part 10: Bulk Metallic Glasses XIV.- Material Behavior in Micro Milling of Zirconium based Bulk Metallic Glass.- Part 11: Computational Thermodynamics and Kinetics.- Comparison of the Phase-field Models to Predict the Recrystallization Kinetics.- Surface Reaction and Transport in Oxides Formed on FeCrAl Alloys in High Temperature Nitridation Environments.- Atomic Scale Modeling of Fe-Al-Mn-C Alloy using Pair Models and Monte-Carlo Calculations.- Control Technique Study of Non-metallic Inclusions in Low Carbon Steel by Rare Earth Final Deoxidization.- Effect of Cooling Rate on Phase Transformation and Microstructure Evolution in a Large Size Forged Ingot of Medium Carbon Low Alloy Steel.- Formation and Control of CaS Inclusion in Gear Steel 20MnCr5.- Investigations on the Mechanical Deformation of Amorphous Alloy Nanowires Using Phase-field Modeling and Thermodynamics Avalanche Models.- Thermodynamic Modeling of Al-Fe-Cr Ternary System.- Part 12: Defects and Properties of Cast Metals.- AModeling and Experimental Investigation on the Formation of Acicular Silicon and Sludge in High Pressure Die Casting of a Modified A383 Alloy.- Hot-tearing of Multicomponent Al-Cu Alloys Based on Casting Load Measurements in a Constrained Permanent Mold.- Effect of Molybdenum Content, Pouring Temperature and Cooling Rate on the Casting Defects of High Chromium White Cast Iron.- Effect of Various Aluminum Content on the Formation of Inclusion.- Effect of Segregated Alloying Elements on the High Strength Steel Properties: Application to the Large Size Ingot Casting Simulation.- Thermal-Mechanical Model of Depression Formation in Steel Continuous Casting.- Study for the Initiation Locations of Longitudinal Surface Cracks on Beam Blank in the Mold of Continuous Casting.- The Influence of SEN and Upper Nozzle Design on the Flow Character for the Slab Quality.- Effect of the Addition of Ce and Si on the Hot Cracking Behavior of SiMn Alloy during the Solidification Process.- Modeling and Predication of Shrinkage Porosity Formation in Steel Ingot.- Numerical Analysis of Coupled Turbulent Flow and Macroscopic Solidification in a Billet Continuous Casting Mold with Electromagnetic Stirring.- Part 13: Environmentally Assisted Cracking: Theory and Practice.- Hydrogen embrittlement and hydrogen-enhanced strain-induced vacancies in a-iron.- Factors causing hydrogen embrittlement of cold-drawn pearlitic steel fractured under elastic/plastic region.- Corrosion of Nickel-Titanium, C110, and Al6061 in Gallium-based Liquid Metal Alloys.- Part 14: General Poster Session.- Synthesis and characterization of Al-B4C powders by mechanical alloying.- Direct Conversion of Celestite to SrCO3 by Wet Milling.- Part 15: High Temperature Electrochemistry III.- Electrochemistry in Molten LiF-BeF2 Salt for Fluoride Salt-Cooled High Temperature Reactor Applications.- Impurity Removal from Titanium Oxycarbide.- Next-Generation Molten Oxide Energy Materials R&D.- Effects of Oxide Precursor Preparation Parameters on the Electrochemical Reduction of Tantalum Pentoxide in Calcium Chloride Melt.- The Effect of Temperature on Electrochemical Codeposition of Mg-Ni Hydrogen Storage Alloys from Molten Salt System.- Part 16: Materials and Fuels for the Current and Advanced Nuclear Reactors VI.- Diffusion Studies in the Development of an FCCI Barrier for High-Burnup Metallic Nuclear Fuel.- Part 17: Materials Engineering of Soft Magnets for Power and Energy Applications.- Development of Mold Inductor for Power Conversion System.- Effect of Annealing Time on the Texture of a 2.8% Si Non-Oriented Electrical Steel after Inclined and Skew Rolling.- Multi-parameter Magnetic Material Characterization for High Power Medium Frequency Converters.- Part 18: Phase Transformations and Microstructural Evolution.- An Experimental Assessment of the a +a' Miscibility Gap in Fe-Cr.- Phase Transformation, Microstructural Evolution and Property Modification in Rapidly Solidified Grey Cast Iron.- Morphologyof Order-disorder Structures in Rapidly Solidified L12intermetallics.- Part 19: Recent Developments in Biological, Structural and Functional Thin Films and Coatings.- Development of Enamel Coatings in Accordance with Recent Regulations of Food Contact Materials.- Transmission Probability of Diffusing Particles - A Case Study.- Preparation of Porous Titanium Oxide Film by Sol-Gel Method.- Part 20: Solid State Precipitation.- Hydride Precipitates in Zirconium Alloys: Evolution of Dissolution and Precipitation Temperatures during Thermal Cycling Correlated to Microstructure Features.- Analysis of Beta´ Cu4Ti Precipitation in Cu-Ti Alloys by Conventional and Diffusion-couple Methods.- Carbide Precipitation in a Low-alloy Ferritic Steel.- Part 21: Student-Run Symposium: Building Bridges - Connecting Academic and Industry Research.- Fundamental Principles for a Successful Collaboration between University and Metalworking Industries.