Network Fundamentals CCNA Exploration Labs and Study Guide, w. CD-ROM

(2.2.5.1) Task 1: Trace Route to Remote Server Task 2: Trace Route Using NeoTrace Task 3: Reflection Task 4: Challenge Task 5: Clean Up Lab 2-1: Topology Orientation and Building a Small Network (2.6.1.1) Task 1: Create a Peer-to-Peer Network Task 2: Identify the Cables Used in a Network Task 3: Cable the Peer-to-Peer Network Task 4: Connect Your Workstations to the Classroom Lab Switch Task 5: Reflection Packet Tracer Companion: Topology Orientation and Building a Small Network (2.6.1.2) Lab 2-2: Using Wireshark to View Protocol Data Units (2.6.2.1) Task 1: Ping PDU Capture Task 2: FTP PDU Capture Task 3: HTTP PDU Capture Task 4: Reflection Task 5: Challenge Task 6: Cleanup Packet Tracer Companion: Using Packet Tracer to View Protocol Data Units (2.6.2.2) Skills Integration Challenge: Examining Packets (2.7.1.3) Task 1: Complete the Topology Task 2: Add Simple PDUs in Real-Time Mode Task 3: Analyze PDUs in Simulation Mode (Packet Tracing) Task 4: Experiment with the Model of the Standard Lab Setup Task 5: Reflection Chapter 3: Application Layer Functionality and Protocols Applications: The Interface Between the Networks Vocabulary Exercise: Matching Concept Questions Making Provisions for Applications and Services Vocabulary Exercise: Matching Multiple-Choice Questions Application Layer Protocols and Services Examples Vocabulary Exercise: Matching Vocabulary Exercise: Completion Multiple-Choice Questions Activity 3-1: Data Stream Capture (3.4.1.1) Task 1: Create a Sound File Task 2: Observe the Properties of the Audio File Task 3: Reflection Task 4: Clean Up Lab 3-1: Managing a Web Server (3.4.2.1) Task 1: Download, Install, and Verify the Apache Web Server Task 2: Verify the Default Web Server Configuration File Task 3: Capture and Analyze HTTP Traffic with Wireshark Task 4: Challenge Task 5: Reflection Task 6: Clean Up Lab 3-2: E-mail Services and Protocols (3.4.3.1) Task 1: Configure the Pod Host Computer for E-mail Service Task 2: Capture and Analyze E-mail Communication Between the Pod Host Computer and an E-mail Server Task 3: Challenge Task 4: Reflection Task 5: Clean Up Skills Integration Challenge: Configuring Hosts and Services (3.5.1.3) Task 1: "Repair" and Test the Topology Task 2: Explore How DNS and HTTP Work Together Task 3: Reflection Chapter 4: OSI Transport Layer Roles of the Transport Layer Vocabulary Exercise: Matching Concept Questions Vocabulary Exercise: Completion Port Type Ranges Exercise The TCP Protocol: Communicating with Reliability Concept Questions Vocabulary Exercise: Matching Managing TCP Sessions Internet Research Exercise Concept Questions The UDP Protocol: Communicating with Low Overhead Vocabulary Exercise: Completion Lab 4-1: Observing TCP and UDP Using netstat (4.5.1.1) Task 1: Explain Common netstat Command Parameters and Outputs Task 2: Use netstat to Examine Protocol Information on a Pod Host Computer Task 3: Reflection Task 4: Challenge Task 5: Cleanup Lab 4-2: TCP/IP Transport Layer Protocols, TCP and UDP (4.5.2.1) Task 1: Identify TCP Header Fields and Operation Using a Wireshark FTP Session Capture Task 2: Identify UDP Header Fields and Operation Using a Wireshark TFTP Session Capture Task 3: Reflection Task 4: Challenge Task 5: Cleanup Lab 4-3: Application and Transport Layer Protocols (4.5.3.1) Task 1: Configure the Pod Host Computer to Capture Application Layer Protocols Task 2: Capture and Analyze HTTP Communication Between the Pod Host Computer and a Web Server Task 3: Capture and Analyze FTP Communication Between the Pod Host Computer and a Web Server Task 4: Reflection Task 5: Challenge Task 6: Clean Up Packet Tracer Companion: Application and Transport Layer Protocols Examination (4.5.3.2) Skills Integration Challenge: Analyzing the Application and Transport Layers (4.6.1.3) Task 1: Repair and Test the Topology Task 2: Explore How DNS, UDP, HTTP, and TCP Work Together Task 3: Reflection Chapter 5: OSI Network Layer IPv4 Concept Questions Vocabulary Exercise: Completion Vocabulary Exercise: Define Networks: Dividing Hosts into Groups Internet Research Exercise Vocabulary Exercise: Completion Routing: How Our Data Packets Are Handled Concept Questions Vocabulary Exercise: Define Routing Processes: How Routes Are Learned Vocabulary Exercise: Completion Lab 5-1: Examining a Device's Gateway (5.5.1.1) Task 1: Understand and Explain the Purpose of a Gateway Address Task 2: Understand How Network Information Is Configured on a Windows Task 3: Troubleshoot a Hidden Gateway Address Problem Task 4: Reflection Task 5: Challenge Task 6: Clean Up Packet Tracer Companion: Examining a Device's Gateway (5.5.1.2) Lab 5-2: Examining a Route (5.5.2.1) Task 1: Use the route Command to Modify a Windows Computer Routing Table Task 2: Use a Windows Telnet Client Command telnet to Connect to a Cisco Router Task 3: Examine Router Routes Using Basic Cisco IOS Commands Task 4: Reflection Task 5: Challenge Task 6: Clean Up Packet Tracer Companion: Examining a Route (5.5.2.2) Skills Integration Challenge: Routing IP Packets (5.6.1.3) Task 1: Configure a Router Interface Task 2: Examining Routes Task 3: Configure a Route Using a GUI Task 4: Examine the Routing of the IP Packet Task 5: Reflection Chapter 6: Addressing the Network: IPv4 IPv4 Addresses Concept Questions Binary-to-Decimal Conversion Exercise Decimal-to-Binary Conversion Exercise Addresses for Different Purposes Vocabulary Exercise: Matching Internet Research Exercise Vocabulary: Completion Concept Questions Assigning Addresses Internet Research Exercises Concept Questions Is It on My Network? Binary Matching Exercise Concept Questions Internet Research Exercise Calculating Addresses Concept Questions Multiple-Choice Questions Testing the Network Layer Concept Questions Vocabulary Exercise: Completion Lab 6-1: Ping and Traceroute (6.7.1.1) Task 1: Use the ping Command to Verify Simple TCP/IP Network Connectivity Task 2: Use the tracert Command to Verify TCP/IP Connectivity Task 3: Challenge Task 4: Reflection Task 5: Clean Up Packet Tracer Companion: ping and traceroute (6.7.1.2) Lab 6-2: Examining ICMP Packets (6.7.2.1) Task 1: Understand the Format of ICMP Packets Task 2: Use Wireshark to Capture and Examine ICMP Messages Task 3: Challenge Task 4: Reflection Task 5: Clean Up Packet Tracer Companion: Examining ICMP Packets (6.7.2.2) Activity 6-1: IPv4 Address Subnetting, Part 1 (6.7.3.1) Task 1: For a Given IP Address, Determine Network Information Task 2: Challenge Task 3: Clean Up Activity 6-2: IPv4 Address Subnetting, Part 2 (6.7.4.1) Task 1: For a Given IP Address and Subnet Mask, Determine Subnet Information Task 2: Challenge Task 3: Clean Up Lab 6-3: Subnet and Router Configuration (6.7.5.1) Task 1: Subnet the Address Space Task 2: Determine Interface Addresses Task 3: Configure the Serial and FastEthernet Addresses Task 4: Verify the Configurations Task 5: Reflection Packet Tracer Companion: Subnet and Router Configuration (6.7.5.2) Skills Integration Challenge: Planning Subnets and Configuring IP Addresses (6.8.1.3) Task 1: IP Subnet Planning Task 2: Finish Building the Network in Packet Tracer Task 3: Configure the Network Task 4: Test the Network Task 5: Reflection Chapter 7: OSI Data Link Layer Data Link Layer: Accessing the Media Vocabulary Exercise: Matching Concept Questions Vocabulary Exercise: Completion Media Access Control Techniques Concept Questions Vocabulary Exercise: Completion Media Access Control: Addressing and Framing Data Vocabulary Exercise: Matching Concept Questions Putting It All Together: Follow Data Through an Internetwork Vocabulary Exercise: Completion Lab 7-1: Frame Examination (7.5.2.1) Task 1: Explain the Header Fields in an Ethernet II Frame Task 2: Use Wireshark to Capture and Analyze Ethernet II Frames Task 3: Challenge Task 4: Reflection Task 5: Clean Up Skills Integration Challenge: Data Link Layer Issues (7.6.1.3) Task 1: IP Subnet Planning Task 2: Finish Building the Network in Packet Tracer, Attending to Some Layer 2 Issues Task 3: Configure the Network Task 4: Test the Network Task 5: Reflection Chapter 8: OSI Physical Layer The Physical Layer: Communication Signals Vocabulary Exercise: Completion Concept Questions Physical Signaling and Encoding: Representing Bits Concept Questions Vocabulary Exercise: Completion Vocabulary Exercise: Matching Physical Media: Connecting Communication Concept Questions Vocabulary Exercise: Matching Lab 8-1: Media Connectors Lab Activity (Lab 8.4.1.1) Task 1: Become Familiar with the Most Common Functions of a Cable Tester Task 2: Test Different Cables for Type and Wiring Problems Task 3: Perform Initial Configuration of the Fluke LinkRunner Task 4: Verify Cable Length Task 5: Reflection Task 6: Challenge Task 7: Clean Up Skills Integration Challenge: Connecting Devices and Exploring the Physical View (8.5.1.3) Task 1: Connect the Devices in the Standard Lab Setup Task 2: View the Standard Lab Setup in the Physical Workspace Chapter 9: Ethernet Overview of Ethernet Vocabulary Exercise: Matching Concept Questions Ethernet: Communication Through the LAN Vocabulary Exercise: Matching Concept Questions The Ethernet Frame Vocabulary Exercise: Matching Multiple-Choice Questions Concept Questions Ethernet Media Access Control Vocabulary Exercise: Completion Concept Questions Ethernet Physical Layer Vocabulary Exercise: Completion Hubs and Switches Vocabulary Exercise: Matching Vocabulary Exercise: Completion Concept Question Address Resolution Protocol (ARP) Multiple-Choice Questions Lab 9-1: Address Resolution Protocol (9.8.1.1) Task 1: Use the Windows arp Command Task 2: Use Wireshark to Examine ARP Exchanges Task 3: Reflection Task 4: Challenge Task 5: Clean Up Packet Tracer Companion: Address Resolution Protocol (9.8.1.2) Lab 9-2: Cisco Switch MAC Table Examination (9.8.2.1) Task 1: Use the Telnet Protocol to Log in to a Cisco Switch Task 2: Use the Cisco IOS show mac-address-table Command to Examine MAC Addresses and Port Associations Task 3: Challenge Task 4: Reflection Task 5: Clean Up Packet Tracer Companion: Cisco Switch MAC Table Examination (9.8.2.2) Lab 9-3: Intermediary Device as an End Device (9.8.3.1) Task 1: Use Wireshark to Capture and Analyze Frames Originating from Network Nodes Task 2: Examine the Origination of Frames in a Small Network Task 3: Reflection Task 4: Challenge Task 5: Clean Up Packet Tracer Companion: An Intermediary Device as an End Device (9.8.3.2) Skills Integration Challenge: Switched Ethernet (9.9.1.3) Task 1: IP Subnet Planning Task 2: Repair Problems with the Ethernet Switched LAN Task 3: Test the Network Task 4: Reflection Chapter 10: Planning and Cabling Networks LANs: Making the Physical Connection Concept Questions Multiple-Choice Questions Vocabulary Exercise: Completion Device Interconnections Concept Questions Vocabulary Exercise: Completion Developing an Addressing Scheme Concept Questions <ulary Exercise: Completion Multiple-Choice Questions Calculating the Subnets Concept Questions Device Interconnections Concept Question Multiple-Choice Questions Lab 10-1: How Many Networks? (10.3.2.2) Task 1: Determine the Number of Subnets in Topology Diagram A Task 2: Record Subnet Information Task 3: Determine the Number of Subnets in Topology Diagram B Task 4: Record Subnet Information Task 5: Determine the Number of Subnets in Topology Diagram C Task 6: Record Subnet Information Task 7: Determine the Number of Subnets in Topology Diagram D Task 8: Record Subnet Information Task 9: Reflection Lab 10-2: Creating a Small Lab Topology (10.6.1.1) Task 1: Design the Logical Network Task 2: Configure the Physical Lab Topology Task 3: Configure the Logical Topology Task 4: Verify Network Connectivity Task 5: Reflection Task 6: Challenge Task 7: Clean Up Packet Tracer Companion: Creating a Small Topology (10.6.1.2) Lab 10-3: Establishing a Console Session with HyperTerminal (10.6.2.1) Task 1: Connect a Router and Computer with a Console Cable Task 2: Configure HyperTerminal to Establish a Console Session with a Cisco IOS Router Task 3: Configure HyperTerminal to Establish a Console Session with a Cisco IOS Switch Task 3: Reflection Task 4: Challenge Task 5: Clean Up Lab 10-3 (Alternative): Establishing a Console Session with TeraTerm Task 1: Connect a Router and Computer with a Console Cable Task 2: Configure TeraTerm Web to Establish a Console Session with the Router Task 3: Reflection Task 4: Challenge Task 5: Clean Up Packet Tracer Companion: Establishing a Console Session with PT Terminal (10.6.2.2) Lab 10-4: Establishing a Console Session with Minicom (10.6.3.1) Task 1: Connect a Router and Computer with a Console Cable Task 2: Configure Minicom to Establish a Console Session with the Router Task 3: Perform Basic Commands Task 4: Reflection Task 5: Clean Up Skills and Integration Challenge: Planning and Cabling Networks (10.7.1.3) Task 1: Build the Network Topology Task 2: Create and Assign an Addressing Scheme Task 3: Interface Configuration Task 4: Testing Connectivity Chapter 11: Configuring and Testing Your Network Configuring Cisco Devices: IOS Basics Concept Questions Vocabulary Exercise: Matching Cisco IOS Command Exercises Test Your Knowledge Applying a Basic Configuration Using Cisco IOS Concept Questions Multiple-Choice Questions Vocabulary Exercise: Completion Verifying Connectivity Test Your Knowledge Concept Question Lab 11-1: Network Latency Documentation with ping (11.4.3.3) Task 1: Use the ping Command to Document Network Latency Task 2: Compute Various Statistics on the Output of a ping Capture Task 3: Measure Delay Effects from Larger Datagrams Task 4: Reflection Task 5: Challenge Lab 11-2: Basic Cisco Device Configuration (11.5.1.1) Task 1: Configure Cisco Router Global Configuration Settings Task 2: Configure Cisco Router Password Access Task 3: Configure Cisco Router Interfaces Task 4: Save the Router Configuration Files Task 5: Configure a Cisco Switch Task 6: Reflection Task 7: Challenge Task 8: Clean Up Packet Tracer Companion: Basic Cisco Device Configuration (11.5.1.2) Lab 11-3: Managing Device Configuration (11.5.2.1) Task 1: Configure Network Connectivity Task 2: Use TFTP to Save and Restore a Cisco IOS Configuration Task 3: Reflection Task 4: Challenge Task 5: Clean Up Packet Tracer Companion: Managing Device Configuration (11.5.2.2) Lab 11-4: Configure Host Computers for IP Networking (11.5.3.1) Task 1: Design the Logical Lab Topology Task 2: Configure the Physical Lab Topology Task 3: Configure the Logical Topology Task 4: Verify Network Connectivity Task 5: Reflection Task 6: Challenge Task 7: Clean Up Lab 11-5: Network Testing (11.5.4.1) Task 1: Design the Logical Lab Topology Task 2: Configure the Physical Lab Topology Task 3: Configure the Logical Topology Task 4: Verify Network Connectivity Task 5: Reflection Task 6: Challenge Task 7: Clean Up Lab 11-6: Network Documentation with Utility Commands (11.5.5.1) Task 1: Design the Logical Lab Topology Task 2: Configure the Physical Lab Topology Task 3: Configure the Logical Topology Task 4: Verify Network Connectivity Task 5: Document the Network Task 6: Reflection Task 7: Challenge Task 8: Clean Up Lab 11-7: Case Study: Datagram Analysis with Wireshark (11.5.6.1) Task 1: Prepare the Lab Task 2: Review the Process of Data Flowing Through the Network Task 3: Analyze Captured Packets Task 4: Complete the Final Analysis Task 5: Conclusion Task 6: Summary Skills Integration Challenge: Configuring and Analyzing Networks (11.6.1.3) Task 1: Plan Task 2: Build and Configure the Network Task 3: Test and Analyze Task 4: Reflection