Advanced Tribology

Stiffness of Gas Foil Bearings.- Biotribological Properties of Natural Swine Joint Cartilage.- Effect of Surface Texturing on Lubrication Film Formation within Non-Conformal Contacts.- Experimental Investigation of Time-Dependent Oil Film Pressure in a Dynamically Loaded Journal Bearing.- Experimental Research and Numerical Simulation of LY12 and HPb62-2 Ring Compression.- Application of Metal Self-Repairing Additives on Cylinder-Piston Ring Rubbing Pairs.- Wettability Study of Multiply-Alkylated Cyclopentanes (MACs) on Silicon Substrates.- Numerical Analysis on Hydrodynamics of Circular Translational Polishing under Mixed Lubrication.- Micro-Tribological Analysis of POM-MoS2s-Compounds.- On Lubrication Characteristics of Dual Tori Double-Enveloping Toroidal Worm Drive.- Thermoelastohydrodynamic Lubrication Analysis of Crankshaft Bearing Considering Crankshaft Deformation under Load.- Transient Behavior of Elasto-Metal-Plastic Journal Bearing during the Stage of Stop.- Analyses on the Splashing Parameters of High-Speed Oil Impacted a Wall in Jet Lubrications.- Interferometry Measurement of Spinning Effect on Sliding EHL.- Effect of Wide Dimples on Planar Contact Lubrication.- Friction Properties and Microstructure of Al-Cu-Fe Nano Films.- Tribological Properties of Ti6Al4V Alloy by FOTS Self-Assembled Monolayers Modification Treatment.- Influence of Spinning Effect on the Rolling EHL Films.- A Study on Lubrication Characteristics between Piston Ring and Cylinder Bore of Bent-Axis Type Piston Pump.- The Fabrication and Lubricant Performance of MoS2 Nanotubes Arrays.- The Research on the Lubricant Aging under Durability Test of the Porous Sliding Bearings.- Models for Predicting Friction Coefficient and Parameters with Influence in Elastohydrodynamic Lubrication.- Elastohydrodynamic Film Thickness in Elliptical Contacts with Rolling and Spinning.- Experimental Study on the Tribological Properties of Pure Powder Lubrication under Plane Contact.- Hydrodynamic Analysis and Experiment Verification of the High-Pressure Small-Flow Centrifugal Pump.- Effect of Liquid Surface Tension and Viscosity on Micro-Bubble Induced by External Electric Field.- Study of Water Lubrication in Sliding Point Contact Friction Pairs with Hydrophobic Surfaces.- A Simplified Numerical Elastic-Plastic Contact Model for Rough Surfaces.- Film Characteristics of Grease in Point Contact under Micro-Swaying Motion.- Effects of Solid Body Temperature on the Non-Newtonian Thermal EHL Behavior in Point Contacts.- Numerical Analysis on Dynamic Characteristics of Flying Magnetic Head with Ultra Thin Spacing.- The Analysis of Higher Guide Bearing Pad Temperature and Its Fault Diagnosis.- Pitting Life Prediction Based on a 3-D Line Contact Mixed EHL Analysis and Subsurface von Mises Stress Calculation.- Numerical Lubrication Simulation of Metal-on-Metal Hip Joints: Ball-in-Socket Model and Ball-on-Plane Model.- Deterministic Simulation of Surfaces in Conformal-Contact Lubrication.- Simulation and Experimental Validation of the Effect of Surface Texture on Fluid Film Formation.- Marangoni Stress and Its Effects on the Flow in an Evaporating Sessile Droplet.- Film Forming Characteristics of Oil-in-Water Emulsion with Super-Low Oil Concentration.- A Piston Lubrication Model Considering the Coupling between the Piston Secondary Motion and the System Inertia Variation in an IC Engine.- Analysis of the Combined Effect of the Surface Roughness and Inertia on the Performance of High-Speed Hydrostatic Thrust Bearing.- Study on the Efficiency of the New-Style Reducer with the Green Lubricant.- Pressure Dependence of the Limiting Shear Stress Coefficient of Liquid Lubricants.- A Method of Dual Number for the Aerodynamic Property Analysis of Gas-Lubricated Mechanism: Self-Pressurizing Thrust Bearings and Non-Contacting Face Seals (Part I: Analytical Methods).- A Model for the Calculation of the Micro-Pores Number of Compressively Molded Polyimide Porous Materials.- Frictional Dynamics in a Two Dimensional Frenkel-Kontorova Model with Square Lattice Symmetry.- Advances in Investigation of Elasto-Aerodynamic Lubrication in Compliant Foil Bearings.- Normal Stress Effects in Journal Bearing Lubrication with Maxwell Fluid.- Analysis of Bearing Outer Ring Creep with FEM.- Effects of Content of MoS2 on Sliding Tribological Behavior of Copper-Based Powder Metallurgy Materials under Electrical Current.- Research on Frictional Wear Properties of C/C Composite with Electric Current.- Friction Behavior of C/C-SiC Braking Composites Fabricated by Warm Compacted-in situ Reaction.- Tribological Properties of Hybrid Ag4SiW12O40 Nanoparticles Multilayer Films.- Study on Fatigue Crack Behavior of Rail in Different Curve Radius.- Improvement in Wear Resistance of TiNi Alloy Processed by Equal Channel Angular Extrusion and Annealing Treatment.- Self-Healing of a Soft Primer Coating Caused by Plasticization during Sliding against UHMWPE.- Performance of an Infinitely Long Transversely Rough Hydrodynamic Slider Bearing.- Investigation of Fretting Fatigue Behavior of Ti811 Alloy at Elevated Temperature.- Dry Sliding Wear Behavior of a Tribological Couple: Spray-Deposited Al-Si/SiCp Composites/Brake Pads.- Wear Behaviors of a Cu-Based Bulk Metallic Glass under Various Gas Atmosphere.- A Study of the Correlation between Gear Wear and Vibration.- Study on the Relationship between Microstructural Change in Friction-Induced Deformation Layer and Friction Behavior of Austenitic Stainless Steel.- Abrasive Wear Behavior of Several Metallic Materials under Simulated Sand-Dust Environment.- Wear Behavior of Plasma-Nitrided 2Cr13 Martensitic Stainless Steel under Air and Vacuum.- Sealing Performance and Wear Mechanism of PTFE Oil Seal.- Fretting Corrosion Wear of Synergy between Mechanical and Electrochemical for Biomaterials in Hanks Balanced Salt Solution.- Torsional Fretting Behaviors of UHMWPE against Different Counter-Bodies.- An Experimental Study on the Rotational Fretting Wear Behavior of LZ50 Steel.- Comparative Study of Tribological Properties with Different Fibers Reinforced PTFE/PEEK Composites at Elevated Temperatures.- Research on Friction Characteristic of End Faces of Mechanical Seals.- Failure Mechanism of Hadfield Steel Crossing.- Synthesis and Tribological Behavior of Surface Coated Cu Nanoparticles in Liquid Paraffin.- Tribological Behaviors at High Load of MoS2 Films in Vacuum.- Experimental Study on Running-in of Steel Fiction Pair of Block on Disk in Oil with Micro-and-Nano Diamond Powder.- Thermomechanical Properties and Tribological Behavior of CaCO3 Whisker Reinforced Polyetheretherketone Composites.- Corrosive Fretting Wear Behavior of a Titanium Alloy TC11 in Artificial Seawater.- Investigation on Rolling Contact Fatigue and Wear Properties of Railway Rail.- Superlubricity Characteristics Using Ceramic Composite Mineral Powder as Lubricating Oil Additive.- On the Wear-Resistance of Zinc-Based Composites Reinforced by Modified Silicon Phase.- On the Wear-Resistance of Low-Alloyed Steel Modified by Inoculants.- Research on Worn Mechanism of Disc-Brake Pair Materials for Drilling Rig.- Modelling of Self-Lubrication in Frictional Interaction.- An Asperity-Contact Based Oxidation Model for Fretting Wear with the Presence of Debris.- Rolling Contact Fatigue of Silicon Nitride Balls under Pure Rolling Condition.- Influence of Different External Pressure on the Thermo-Mechanical Coupling of the Rough Surface during Sliding Contact.- Effect of Transverse Surface Topography on Cavitation Erosion.- The Theory of Debris Group in Ferrographic Analysis.- A Method to Monitor Nonferrous Debris in Ferrographic Analysis.- Interaction between Micro-Particales and Bubbles in Cavitation-Erosion of Hydro-Machinery.- Magnetization of Friction Surfaces and Wear Particles under Tribological Processes.- Wear Progress Prediction of Carbide Tool in Turning of AISI1045 by Using FEM.- Friction and Wear Properties of Fe7Mo6-Based Alloy under the Lubrication of Ethyl-Alcohol.- Seizure of PEEK and Its Composite at High Sliding Velocity in Oil Lubrication.- Tribological Behavior of Chromium Alloyed Layer Prepared on Surface of TiAl.- Wear Characteristics under Boundary Lubrication Contacts in Phosphorated Starch Based Electrorheological Fluids.- Abrasive Wear Mechanisms of Multi Component Ferrous Alloys Abraded by Soft, Fine Abrasive Particles.- The Analyzes of Mutual Influence of Contact Spots in Sliding Contact of a Periodic Surface and a Viscoelastic Foundation.- Different Nano-Fillers on the Tribological Properties of PTFE Nanocomposites.- Study on Surface Passivation Treatment and Tribological Properties of 1Cr18Ni9Ti Stainless Steel in Hydrogen Peroxide.- High Speed Tribology: Some Developments on Thermal Behaviors.- Dry Sliding Wear Behavior of Cu-Graphite Composite within a Wide Range of Sliding Velocity.- Tribological Aspects of Control over Frictional Interaction between Solids in the Presence of Liquid Crystals.- Effects of the Concentration of Sodium Lauryl Sulfate Solution and NaCl Additive on the Potential-Controlled Friction.- Study of Wear and Corrosion Properties of Coated Ionic Liquid.- Deformation Behavior of Al-4Cu-2Mg Alloy during Cold Upset Forging.- Dry Sliding Wear Behavior of Pure Aluminium and Al-Cu Alloys.- Tribological Properties of Spark-Plasma-Sintered Al2O3-SrSO4 Self-Lubricating Nanocomposites at Elevated Temperatures.- Tribological Behaviors of Some Materials in Sea Water.- Nanofretting Wear of Monocrystalline Silicon (100) against Spherical SiO2 Tip in Vacuum.- Influence of Surface Finishing Operations on the Reciprocating Sliding Friction and Wear Response of WC Based Cemented Carbides.- Mechanical and Tribological Properties of Titanium Reinforced Polybenzimidazole Composites.- Friction and Wear Behavior of Laser Cladding NiAl/hBN Self-Lubricating Composite Coating.- Research on the Wear-Resisting Material Produced by Vacuum Evaporation Pattern Casting.- Effect of Surface Topography on Friction and Wear of Cast Iron for Cylinder Liners.- Wear Resistance Analysis of Hardening Materials for Engine Cylinder.- Effects of Speed Sequence on Friction Properties of Sintered Cu-SiO2.- The Fluid Dynamic Lubrication between Tooth Surfaces of High Order Contact.- Study on Friction and Wear Behavior of Glass Fiber and Fly Ash Reinforced MC Nylon Composites.- Experimental Study of Ultrasonic Vibration Assisted Chemical Mechanical Polishing for Sapphire Substrate.- Friction and Wear of the Ceramic Coating Formed on Magnesium Alloy.- Thermal-Mechanical Couple Simulation of Solid Brake Disc in Repeated Braking Cycles.- Preliminary Applications of King's ART Technology in Industry.- Wear Properties of Potassium Titanate Whiskers Reinforced ZL109 Alloy Composites.- Mineralogical Mechanochemical Agent Assisted Reconditioning Effects and Mechanism on Worn Ferrous Surfaces.- Experiment Research on the Friction Performance of O-Ring with Different Oil Swelling Ratios.- Friction Behaviors of Bushing in Rolling Contact with Shaft and Electroless Ni-PTFE-P or Ni-Al2O3-P Coating.- Nano and Micro Indentation and Scratch Tests of Mechanical Properties of Thin Films.- Synthesis of Nano-MoS2 Particles and Its Role in the Self-Lubrication of Polyacetal-Based Composite.- Analysis of a Three-Body Contacting model with the Adhesive effect.- Analysis of Three-Body Contacting Model with Scale Effect.- Adhesion, Friction and Wear Measurements at Microscale.- Fabrication and Nano-Tribological Behaviors of PDDA/Ag NPs Composite Molecular Deposition Films.- Frequency Shift of Single Walled Carbon Nanotube under Axial Load.- Effect of Heat Treatment on the Nano-Tribological Properties of Ionic Liquid Films.- Analysis on Wafer Tilt Effects in CMP Process.- Size Effects on Friction of C3602 in Cylinder Compression.- Investigation on the Tribological Characteristics of Nano/Micro Solid Anti-Wear Additives in Engine Lubricants.- The Influence of Carbon Nanotubes on the Tribological Behavior and Wear Resistance of a Polyamide Nanocomposite.- Experimental Investigation of the Frictional Behaviors at Particle-Surface Interfaces in CMP Application Using an Atomic Force Microscope.- Finite Element Simulation and Analysis of Nano-Scale Adhesive Contacts.- Nano/Micro-Tribological Properties of Ultrathin Functionalized Imidazolium Ionic Liquid Films on Silicon Wafer.- Micro Asperity Type Induced in Electrostatic Resistance of MEMS.- Experimental Analysis and Numerical Simulation of the Recess Slider in Magnetic Recording System with Ultra-Thin Spacing.- Effect of Solvents on Frictional Properties of Monolayer Lubricant Films Coated on Magnetic Disk Surfaces.- Fly-Ability and Durability Test of Dynamic Fly Height Heads at 1 nm Clearance.- Cavitation Erosion Characteristics of Titanium Alloy Thin Film Prepared by Ion Beam Enhanced Deposition.- Measurements of Vertical Elongation and Adhesive Force of Nanometers-Thick Lubricant Films on Magnetic Disks Using Micro Probe for SPM.- Experimental Research on Boundary Slip of Confined Liquids at Micro/Nano Scale and Effect of Shear Rate and Viscosity.- Study on Micro-Scale Gas Slider Bearing w ith Direct Simulation Monte Carlo Method.- Tribological Behaviors of Self-Assembled Dual-Layer Films in Atmosphere and in Vacuum.- Research on Fractal Contact Model of Cylinders' Surface.- Friction between Diamond-Like Carbon (DLC) Films-a Molecular Dynamics Study.- Molecular Dynamics Simulations of Atomic-Scale Friction in Diamond-Silver Sliding System.- Molecular Dynamics Study on Carbon Nanotubes Sandwiched between Si Surface.- Tribological Aspects of Nanoimprint Process.- Molecular Dynamic Simulation of Effect of Crystallographic Orientation on Nano-Indentation/Scratching Behaviors of BCC Iron.- 3D Misorientation of Cantilevers and Its Impact in Friction Force Microscopy.- Coupled Simulative Analysis for Drive Characteristic of Micro-Comb Structure.- Relating Friction and Processes Development during Chemical - Mechanical Polishing (CMP).- An Irreversible Thermodynamics Theory for Friction and Wear.- Fabrication and Flying Test of Silicon Sliders.- Surface Damages on Silicon Surfaces Created by Large Silica Cluster Impacts: Molecular Dynamics Simulation.- Silicon Oxide Surface Chemistry and Nano-Tribology.- Dynamic Testing for Evaluation of HDI Robustness.- Effect of Wall Roughness on Electroosmotic Flow in Microchannels.- Nanopositioning and Nanomeasuring System: Friction and Its Control.- Fundamentals of Friction and Energy Dissipation.- The Future of Boundary Lubrication by Carbon Coatings and Environmentally Friendly Additives.- Tribological Behavior of Sputtered Boron Carbon Nitride Coatings and the Influence of Processing Gas.- Effect of the Prepared Process on Tribological Properties of Multi-Layer Elastomeric DLC Monolayer.- Tribology Behaviors of in situ Nanoparticles Doped Molecular Deposition Films.- The Friction Property of Hydrogenated Carbon with Fullerene Microstructure after Annealing.- Study of Worn Surface Characterization Based on Singular Entropy.- An Adaptive Meshless Model for Asperity Thermal Elasto-Plastic Contacts Considering Temperature-Dependent Material Properties.- Thermal Oxidized Coating on Surface of Titanium Alloy for Improvement of Tribological Properties in Vacuum.- Study on Friction and Wear Properties in Vacuum for ?-Ray Irradiated PTFE Coatings.- Friction and Wear Behaviors of Plasma Sprayed Conventional and Nanostructured WC-12Co Coatings at Elevated Temperature.- Wear Behavior of Chromizing-Titanizing Coating.- Preparation and Polishing Performances of ?-Al2O3/Fe2O3 Composite Particles.- Effect of Gamma Irradiation on Friction and Wear Behavior of MoS2/Graphite Coatings in Vacuum.- Preparation of Silica / Alumina Composite Abrasives and Their CMP Behavior on Hard Disk Substrate.- Friction Properties of Laser Surface Texturing and Molybdenum Alloying Duplex-Treated Ni-Based Alloy.- Erosion Characteristic in Ultrasonic Cavitation Experiment.- Modification Effects of Potassium Titanate Whisker on the Water Absorption and Tribological Properties of PTFE Composites.- Influence of the C+-Implantation Dose on the Wetting and Adhesion Properties of Silicon Surfaces.- The Effect of Laser Induced Oxygen-Diffusion Hardening on the Surface Structure and Scratch Resistance of Commercially Pure Ti.- Structure and Tribological Characterization of TiB2/TiBN Multilayer Coatings Deposited by Magnetron Sputtering.- First Principles Investigation of Water Adsorption on Fe (110) Crystal Surface Containing N.- Research on Fabrication and Tribological Properties of Ti-Al Intermetallic Compound Lubricate Film.- XPS and SEM Analyses of Self-Repairing Film Formed by Mineral Particles as Lubricant Additives on the Metal Friction Pairs.- Study on the Characteristics of Transferred Lubricating Thin Films on Ceramic Surfaces Generated in Liquid Nitrogen.- Cr17Ni14Mo3 Powder Laser Cladding on 45Steel Substrate.- Microstructure and Tribological Properties of Plasma Sprayed NiCr/Cr3C2 and NiCr/Cr3C2-BaF2-CaF2 Composite Coatings.- Friction and Wear Property of Amorphous Carbon Films Prepared by Ion Beam Assisted Deposition.- Research on Silicon Content and Structure Relationship of Amorphous Si-DLC Films by Molecular Dynamics Simulations.- Effect of Deposition Parameters on Nano-Mechanical Properties of DLC Films by PECVD.- The Effect of Laser Texturing of Steel Surfaces on Film Lubriction Based on Stribeck Curves.- Formation and Crystallization Kinetics of Amorphous Alloys.- Fabrication and Wear Resistance of Ni-CeO2 Nanocomposite Coatings by Electrodeposition under Ultrasound Condition.- On the Measurement of Slip Length for Liquid on Super-Hydrophobic Surface.- Effect of Plasma Surface Niobizing of ?-TiAl Alloy on Wear Resistance.- Tribological Properties and High-Speed Drilling Performance of Zr-C?H?Nx% Coatings with Different Contents of Nitrogen.- Tribological Behavior of Sputtered CrAINbN Hard Coatings at Elevated Temperatures.- The Method of Elastic Coatings Diagnostics from Indentation Data.- The Effect of Electric Field on Adhesion Force with Liquid in MIM Structures.- Simulation of Friction Composite Behavior Using Heat Treatment.- In-situ Microtribology with High Local Resolution.- Optimization of Energy Efficiency of Transparent Conducting Oxide Thin Films in the Field of Solar Cells by Microtribological Rating.- Contact Analysis of a Spherical Wear Particle between Elastomeric Seal and Coated Steel Surface.- Effect of Particles Size and Morphology of Selected Compounds of Friction Composite on Friction Performance.- New Technique of DLC Coating Obtaining for Tribology Applications.- Effect of Spraying Parameters on Microstructure and Thermal Stability of Fe-Based Metallic Glass Coatings.- Factors Influencing the Fluid-Assisted Surface Cracking under Rolling-Sliding Contact Loading.- Microstructure, Phase and Microhardness Distribution of Laser Deposited Ni-Based Amorphous Coating.- Friction Modifiers Optimization of the Ceramic Composites for Automotive Applications.- Friction and Wear Behaviors and Rolling Contact Fatigue Life of TiN Film on Bearing Steel by Plasma Immersion Ion Implantation and Deposition Technique.- Connectivity Characterization of 3D Surface Topography Based on Mathematical Morphology.- Effect of Microstructure on the Friction Properties of the Electroless Ni-P Deposit.- Erosion Behaviors of Elastic Polymer Coatings.- Mechanical Properties of the TiAlSiN Coatings by Post Heat Treatments.- In-situ Measurements of Surface Temperature Fields on Ring-Block Contact Surface under Friction Using an Infrared Thermography.- Research on the Preparation, Characterization and Tribological Properties of Ultra-Thin Self-Assembled Monolayers on the Magnetic Head Surface.- Super-Hydrophobic and Self-Lubricating Carbon Coating on Ti3SiC2.- Corrosion Protection of Ultra-Thin Diamond-Like Carbon Films on Cuprum.- SEM and AFM Study on Nanoparticles Used as Lubricating Oils Additives.- Study on Wear Model for Piston Ring and Strengthened Cylinder Wall of Engine.- State of the Art in Laser Surface Texturing.- La2O3 Effect on Microstructure, Mechanical and Tribological Properties of Ni-W Coatings.- A Comparative Study of Growth Process and Tribological Behavior between Single Component and Mixed Alkylsilane Self-Assembled Molecular Films.- The Effect of Surface Morphology on the Friction Behavior of HF-CVD Diamond Films.- Particles Detection and Analysis of Hard Disk Substrate after Post-CMP Cleaning.- Hard Wear-Resistant Coatings: A Review.- The Cavitation Erosion of the Mild Carbon Steels Implanted with Titanium and Nitrogen.- Research of the Pits Induced by MnS Inclusions at the Incipient Stage of Cavitation Erosion.- The Water Wettability of the Hydrogenated and Oxygenated Diamond Films.- Investigation on the Effect of Transverse Grooves on Friction Force.- Research for Forming Mechanism of Benard Coating Shaped Bi-Unit Composite Structure.- Microstructure and Mechanical Properties of TiCN Coatings Prepared by MTCVD.- Erosion-Wear Behavior and Mechanism of HVAS Coatings.- Tribological Properties of Textured Ti Coating Prepared by Masked Deposition.- A Method of Micro Laser Surface Texturing Based on Optical Fiber Focusing.- Application of Laser in Surface Technology -An Overview of the Research Work Performed in SKLT.- Influence of Heat Treatment on Hardness, Elastic Modulus and Bonding Strength of Ti/Ta/TiN/TaN Nanomultilayer Coatings.- Mechanical and Tribological Properties of Titanium Reinforced Polybenzimidazole.- Diamond-Like Carbon Thin Films Deposition on Glass Using an Electron Cyclotron Resonance (ECR) Microwave Chemical Vapor Deposition (CVD) System.- The Biotribological Behavior Researches on the ?-Tocopherol Doped and Gamma-Irradiated UHMWPE.- The Effects of Protein and pH on the Tribo-Corrosion Performance of Cast CoCrMo - A Combined Electrochemical and Tribological Study.- Biotribological Properties of Carburized Titanium Alloys.- Effect of Corrosion and Biofilm on Friction Behavior in Biotribocorrosion System for Metal-on-Metal Hip Prosthesis.- A Microscopic Model for Pedestrian Sl ips Caused by Particle Contamination.- Elastohydrodynamic Lubrication of Aspherical Metal-on-Metal Artificial Hip Joints.- Long-Term Contact-Coupled Wear Prediction for Total Metal-on-Metal Hip Joint Replacement.- The Molecular Orientation Induced by Multi-Directional Sliding in the UHMWPE Used for the Artificial Joint Replacements.- Radial Displacements in a Thin Semi-Spherical Layer of Biphasic Articular Cartilage for Use in EHL Models of Natural Hip Joints.- Investigations of the Sliding Friction Behaviors of Locusts on Slippery Trapping Plate.- Tribology of Sequentially Irradiated and Annealed UHMWPE with and without Impingement.- Study on UHMWPE Carrying Estradiol to Treat the Particle-Induced Osteolysis.- Friction and Wear Characteristics of UHMWPE Studied by Orthogonal Method.- Wear Mechanism of Sliding Tracks between Femoral Head and Acetabular Cup of Artificial Joint.- Dynamic Contacting Characteristic of Natural Articular Cartilage under Reciprocating Sliding.- Application of Principal Component Analysis and Fuzzy C-Means Clustering Algorithm to the Classification of UHMWPE Wear Debris from Artificial Joints.- Numerical Surface Characterization of Wear Debris from Artificial Joints Using Atomic Force Microscopy.- A Novel Propelling Mechanism Based on Frictional Interaction for Endoscope Robot.- Study on the Release of Estradiol from UHMWPE Loading Estradiol Wear Debris in vitro.- A New Method To Simulate Wear within the Patellofemoral Joint of TKR.- Modification and Tribological Study on Implant Polymers of Hip Prosthesis.- Dynamic Contact Model of Bio-Adhesive Pads of Animals: Simulation Experiments.- Examination of Biolox® delta from Serum Lubricated Reciprocating Sliding Wear.- Lubrication of Synovial Joints.- Mechanism and Applications of Chemical and Mechanical Polishing.- Tribological Performance of Biomass-Oil from Straw Product.- Extreme Pressure Properties and Mechnism of Bismuth Naphthenate with Sulfur Containing Additives.- Synthesis and Tribology Properties of Stearate Coated Ag Nanoparticles.- Filtrate Reducer Activity and Antiwear Behavior of Drilling Fluid Doped with an Non-Conventional Additive.- Utilization of Industrial and Agricultural Wastes as a Source of Lubricants, Additives and Fuels.- Effect of Tribochemical Reaction on Friction and Wear of DLC under Lubrication with Ionic Liquids at High-Vacuum Condition.- Tribochemical Reaction of Ionic Liquids on Sliding Metal Surfaces.- The Tribological Properties of Oil-Soluble Nano-Copper and Nano-Silica Particles as Additives of Lubricating Oils.- Preparation and Tribological Properties of Monodispersed Metallic Cu-Sn Alloy Nanoclusters with Modified Surface.- Tribological Studies on a Novel Borate Ester Containing Benzothiazol-2-yl and Disulfide Groups as EP and Multifunctional Additive.- Tribological Behavior of AZ91D Magnesium Alloy against SAE52100 Steel under Ionic Liquid Lubricated Conditions.- Tribological Characteristics of Magnesium Alloy Using BN-Containing Additives under Boundary Lubricating Condition.- Synthesis of YPO4 Nanoparticals vis Microemulsion Method and Its Friction Properties of Lubricating Oils.- A Protective Coating Formed in-situ on the Cylinder Bore in Presence of Mg6Si4O10(OH)8.- Chemical Mechanical Polishing of Copper in Organic Phosphonic Acid System Slurry.- Chemical Mechanical Planarization of Copper Using Ethylenediamine and Hydrogen Peroxide Based Slurry.- Rheological and Tribological Characteristics of Chemically Modified Rapeseed Oil.- Research on Friction-Coatings with Activated Ultra-Thick Tin-Base.- Surfactants Lubricating Oil Additives.- Efficient Tribology Testing of Lubricating Oils with Nano-Additives.- Manufacture and Characterization of C/C-SiC Fabricated by Warm Compacted-in situ Reacted Process.- Experimental Investigations on Relationshi