The Use Of Cold Sprayed Alloys For Metallic Stents
(Sprache: Englisch)
1- This study shows the ability to successfully cold-spray 316L stainless steel using nitrogen and helium as a propellant gas. The microstructure was characterized with low porosity and fine grain structure. In addition, after post-processing heat...
Leider schon ausverkauft
versandkostenfrei
Buch
54.90 €
Produktdetails
Produktinformationen zu „The Use Of Cold Sprayed Alloys For Metallic Stents “
Klappentext zu „The Use Of Cold Sprayed Alloys For Metallic Stents “
1- This study shows the ability to successfully cold-spray 316L stainless steel using nitrogen and helium as a propellant gas. The microstructure was characterized with low porosity and fine grain structure. In addition, after post-processing heat treatment, the microstructure became denser (i.e. lower porosity). The microhardness did not change with 400°C annealing temperature but decreased significantly at 800°C, which can be explained by the recrystallization that occurs during cold-spraying. Both the ductility and strength were improved after annealing at 1100°C, in particular. 2- This study shows the ability to successfully cold-spray composite 316L-CoCr using nitrogen as a propellant gas with Co-Cr volume fractions (i.e. 25%, 33.3%). The deposition efficiency decreased with increasing the amount of Co-Cr. The microstructure is characterized by low porosity level in the first two mixes. At 50% as mixed Co-Cr and 316L, the actual as coated material was 33% Co-Cr, due to difficulties in bonding Co-Cr particles to each other. Thus, the porosity was high at the 50% mixture and cracks were also apparent.
Bibliographische Angaben
- Autor: Bandar Almangour
- 2014, 112 Seiten, Maße: 22 cm, Kartoniert (TB), Englisch
- Verlag: LAP Lambert Academic Publishing
- ISBN-10: 3848421577
- ISBN-13: 9783848421572
Sprache:
Englisch
Kommentar zu "The Use Of Cold Sprayed Alloys For Metallic Stents"
0 Gebrauchte Artikel zu „The Use Of Cold Sprayed Alloys For Metallic Stents“
Zustand | Preis | Porto | Zahlung | Verkäufer | Rating |
---|
Schreiben Sie einen Kommentar zu "The Use Of Cold Sprayed Alloys For Metallic Stents".
Kommentar verfassen